Monday, February 9, 2015

The Winter Months


During the winter is seems that construction tends to slow down in San Luis Obispo County, partly due to weather, partly due to the holidays, and partly due to the timing of other jobs starting later in the year.  For us we usually find some time to take a vacation or work on projects of our own as well as fill in work with jobs that are small enough to complete within a few days to weeks.  In short this is what we have been up to.


Late last year the patriarch and matriarch of the Whitaker family sold their home in Arroyo Grande and were able to purchase a piece of property in the Huasna Valley, a place that they have many friends and have been visiting for nearly thirty years.  In celebration they decided to have the Whitaker family Thanksgiving gathering at their new property.  However there was next to nothing to provide shade or shelter for the gang.  So the idea was born to build a trellis from old form boards and other left over materials from other jobs.  It was a blast building with no plans other than it needed to be done within a few days, and this is what was created...



Left over TJI were used to build columns and 2x12, 2x10, and 2x6 were used to build the rafters and other details.


Chad's outlooker design.




Sometimes work can be fun, Coby swears there was a fly on Chad's head.


The trellis turned out pretty good and only took about a day or two.


Our friend John Gutierrez need a roof system to be put on the shop he was building himself so we took a few weeks to install the trusses and sheet it for him so he could finish the project.  Of course we like to use Louis' Crane when we lift things because he is simply the best and we have done work with him for many years.


Chad knows how to run the ridge blocks like a champ, he is pretty much fearless.


Phil has earned his place working on the ground,  walking plate is a young mans job.



We placed the last truss as the sun set, the short days of winter make you appreciate the long, lingering days of summer.


No shave November is a common act of defiance and as the month ends wild facial hair becomes sculpted masterpieces.


This is how to cut rafter-tails.



We were fortunate enough to return to the Van Buerden residence to install HAT channels for Soenke Construction.  These were meant to hang the ceiling material from to form the illusion that the ceiling was floating. 


Vacation!! Coby with his girlfriend Melanie visited the Eastern Sierra in December.  Note that the beard continued past November.


Another day of R and R.  Coby was invited to join his girlfriend's father at Tejon Ranch to "hunt" pheasant.  It was a blast!




The PC Whitaker Construction christmas parade float in the village of Arroyo Grande, Chad's father-in-law provided the vintager tractor and trailer.  He drove it from San Luis Obispo to Arroyo Grande, nearly twenty miles.



Thursday, November 20, 2014

Tools of the Trade

Hammers, saws, and levels are probably a few of the things that come to mind when thinking of the tools that are used in construction.  However there are many more that are used daily that all serve a different purpose, and a times are used in creative facets.  For example a sawzall is primarily used to cut straight through materials, but it can also be used to act as a large jig saw in a pinch.  The point is that it's important to have the right tool for the right job.  This is the primary reason there are so many different types of tools because every tool has a purpose.

When Phil gets to talking about the old days when he started building homes, he usually remarks that the only power tools he needed were a skill saw and a sawzall.  As is the norm in life, things tend to become more complex, the same is true for building.  If you took a look at most contractors tool box you would find, in addition to the previously mentioned tools, an impact driver, drills, clamps, volumes of sockets and adapters, compressors, nail guns, palm nailers, miles of extension cords, air hoses, grinders, big nasty burly beam saws, and the list goes on.  It may seem a bit extreme, but all these and more are required if one wants to finish a project on time and within budget.  This is why there aren't too many people still using hand saws and hand drills.  The building industry is constantly evolving and striving for production and efficiency.  This is due to the change in building codes, engineering, and architecture.

For the general public who might be curious about the tools of the trade enjoy browsing the library of tools that we use nearly everyday to bring concepts and dreams to fruition.



Coby with his trusty framing square and pencil in his mouth.


Known as a circular saw we only use Skilsaw brand circular saws.  This is the second generation Skilsaw known as the Mag 77.  It's a few pounds lighter than the original which equates to less fatigue throughout the day.  However the original model is pretty much bullet proof, capable of withstanding falls off roofs and being dropped on concrete.  There are scratches to prove this.


The Milwaukee Sawzall, they come in a few different sizes but all are worth their weight in gold.  It's always a good day when one doesn't need to break one out, but when you need one it's nice to know that you have one ready to get the job done!


Stihl demo saw.  Cuts though just about anything that isn't wood, concrete and steel are its bread and butter.  It's a two stroke engine that runs on mixed gas that will buck and scream so you better hold on.


Stihl blower, Stihl makes some of the best gas powered tools as many people can agree with.  The ease of start and power they provide is just comforting to the operator.  The blower has pretty much replaced the broom and dustpan, but one can never fully retire those.


There have been many air compressors to come and go throughout the years, this one is just barely a year old.  This model is neat because it is compartmental.  The top half is the compressor itself and the bottom is a large air tank.  The neat thing is that the compressor has a small air tank of its own and can operated independently.  This is nice for large jobs because you can set up the compressor next to a power source and run a hose to the bottom air tank next to were you need it.  Works great for jobs big and small.


On the left is 150 feet of air hose and on the right is 100 feet of power.  Some people don't like the blue "garden hose" but I would argue that it holds more air and therefore puts less stress on the compressor extending its life and providing the user more air pressure.


Occidental full grain leather tool bags with an extra goodie bag in the middle.  Occidental makes by far the best and longest lasting tool bags.  These belong to Coby and were given as a bonus for running a job while Phil was on vacation.


Some of the important items found within most carpenters tool bags.  Sharp chisel, torpedo level, 30 foot tape measure, knife, nail set, pencil, speed square, cat's paw, and a framing hammer.  Now if you look inside a contractors truck you will find multiples of each, some broken, some old, and some that only get used on special occasion.  The Whitakers like to name their hammers, this one is Ole Stubby.  I know Chad has had a few and I believe his current one is named Champ.



Monday, October 27, 2014

Las Ventanas, Yocum Residence 2013

More photos of the Yocum residence located near Lopez Lake in the Arroyo Grande Valley.  The general contractor, Bob Cantrell Construcion, is nearly finished with this house and therefore photos of the final product will be added soon.



The front entry is a vaulted roof utilizing 6x6 and 8x8 beams with tongue and groove (T&G) paneling. The rest of the house features beams similar to the entry in the hallways and great room.  The truss seen in the foreground was hand built and fit perfectly when set in place, that's craftsmanship.


On the right is the piano room and on the left is the dinning room which also features T&G like the entry.


Chad framing the tall walls in the entry, which are close to 18 feet high.


Starting with the garage and working our way north, 90% of the walls were stick framed due to the height and weight of each wall.  You can also get an idea of how we like to start framing.  Usually one person cuts the headers, top cripples, bottom cripples, and sills ahead of another crew which frames the walls behind the cut man. 



Apparently we all got the memo of what to wear that day. 






Monday, October 20, 2014

Bill Van Buerden Residence

This is the current location of P.C. Whitaker Construction's efforts. Located just up the hill from another house we built for Bill's brother last winter in Barren Canyon Estates. This house can be seen from the 101 freeway traveling north just off the San Luis Bay exit. This is a very unique location on a hill situated among Coast Live Oaks and chaparral. The location has been a challenge for shipping materials to the job site considering the grade, which is well over 15%, however every problem has a solution. 


This deck covers a first floor studio and serves as additional entertaining space for the main residence.


Facing the theater room and guest bedroom which looks out on the front courtyard.  Two sheer panels help to connect the steel framing to the wood framing.



A day with the crane usually involves Louie's Crane, a stack of trusses and a few good men working in beautiful harmony.  Installing the SIP panels took longer than a single day but came together not too differently than a stack of trusses.  SIP panels are a complete roof system.  They are complete in that they contain dense foam insulation sandwiched between two sheets of plywood.  Therefore combining a few different elements that, after installation, is basically ready for the roofer.  


SIP panels that cover the great room and a view of Shell Beach on the left and a sliver of Avila Beach on the right.


Chad building rafter tails that cantilever three feet past the edge of the exterior walls.


Hardware, hardware, hardware...


Coby taking full advantage of the "open office" concept and loving it.  


The beams that support the great room roof are nearly 35 feet in length and each weigh upwards of 2,500 pounds.




Leon Van Beurden Residence

These are some final photos from Leon Van Beurden's residence.  P.C. Whitaker Construction was hired for framing of the house in winter of 2013.


Coby cutting a stack of beams, posts, and headers for the house with a 16 inch beam saw.


The three car garage and studio above.


Part of the lani, the windows in the rear of the photo slide into the walls producing an 18 foot opening providing an indoor/ outdoor living experience. 


Shade and energy saving three foot overhangs surround the house.


The front entry with office on the left and breakfast nook on the right


Open concept living and dinning room.


Master bathroom windows.


Lani and back porch living and entertaining space.